Project Ånnerudskogen: Roofs and terraces 179 M²

Roofing and laying of Grade Roof`s fall insulation has been carried out on a 179m2 flat roof in Asker.

The roof was completed in a few days and the result was a perfect fall on the roof.

Original roof drawing with the 4-way fall.

Sectional specifications:

Drainages
Seksjon A: 1.1-1.2-1.3-1.4-1.5, 2.1-2.2-2.3-2.4, 3.1-3.2-3.3-3.4, 4.1-4.2-4.3-4.4 (17 skiver)
Seksjon B: 1.1-1.2-1.3-1.4, 2.1-2.2-2.3-2.4, 3.1-3.2-3.3-3.4 (12 skiver)
Section C: 1.1-1.2, 2.1-2.2, 3.1-3.2, 4.1-4.2, 5.1-5.2 (10 elements)
Section D:1.1-1.2-1.3, 2.1-2.2-2.3 (6 elements)

Drainages
Section A: 1.1-1.2-1.3, 2.1-2.2-2.3, 3.1-3.2-3.3, 4.1-4.2-4.3 (12 elements)
Seksjon B: 1.1-1.2-1.3-1.4, 2.1-2.2-2.3-2.4, 3.1-3.2-3.3-3.4, 4.1-4.2-4.3-4.4, 5.1-5.2-5.3-5.4 (16 skiver)

Section C: 1.1-1.2, 2.1-2.2, 3.1-3.2 (6 elements)
Seksjon D: 1.1-1.2-1.3-1.4-1.5, 2.1-2.2-2.3-2.4-2.5 (10 skiver)

The roof wedges
4 stk. Kil 1, 50-70 mm
4 stk. Kil 2, 70-90 mm
4 stk. Kil 3, 90-110 mm
2 stk. Kil 4, 110-130 mm
2 stk. Kil 5, 130-150 mm

Laying specifications sections / pallet.

The picture shows the sandwich construction: From the bottom steam barrier - 30mm steinull plater rock wool plates - 100mm EPS plate - Grade Roof`s fall elements in EPS - 30mm rock wool plates.

Laying and adapting Grade Roof EPS drop boards with rock wool insulation above and below, so-called sandwich insulation.

Laying and adapting Grade Roof EPS drop boards with rock wool insulation above and below, so-called sandwich insulation.

Laying and adaptation of membrane.

Inspection of progress.

Inspection of progress.